Discover how to use a hand held bidet effectively for a clean and refreshing wash. Our comprehensive guide walks you through each step, including locating the bidet sprayer, adjusting the water pressure, and achieving optimal cleanliness.



Using a bidet is a great way to enhance personal hygiene and achieve a clean, refreshing feeling after using the toilet. In this article, we will guide you on how to use a bidet properly, specifically focusing on the Aquaus 360° bidet sprayer ensuring that you have a comfortable and satisfying experience. The Aquaus 360° provides a simple and all-natural solution for effective personal hygiene. We will also provide an installation guide for this particular bidet model and address some common questions regarding bidet usage.

Step-by-Step Guide on How to Use a Bidet

installation Guide for Aquaus 360° Bidet Sprayer

Installing the Aquaus 360° bidet sprayer is a straightforward process. Follow these steps:

Aquaus 360 bidet for toilet instructions

Pre-Installation Preparations:

NOTE – Toilet must have a flexible water supply line to install the Aquaus properly.

NOTE – Before installation, place a small towel or shallow pan under your water supply line.

NOTE – Make sure the nut above the water line nut is tightly screwed against the bottom of your toilet tank to prevent water leakage. If there is any leaking, refer to the troubleshooting photo below.

  1. Installing the T-Valve: Start by shutting off the toilet’s water by turning the valve handle clockwise. Flush the toilet while holding the flush lever until all the water has drained except for a small amount at the bottom of the tank. Place a towel or shallow pan below the water line connection area. Screw the Aquaus T-valve nut onto the toilet threads, ensuring the washer is in the nut and pushed to the bottom. Turn the nut counterclockwise, being careful not to cross-thread it. Position the valve for easy access to the on/off safety valve lever while sitting on the toilet and finish tightening the nut firmly by hand.

  2. Attaching the Water Supply Line: Unscrew the hand-tight water supply line nut by turning it clockwise. Make sure the rubber washer is still in the nut and not damaged. Screw the water supply line nut onto the T-valve’s male threads by turning it counterclockwise. Be cautious not to cross-thread the nut.

  3. Connecting the Hose and Sprayer: Screw the hose nut onto the half-inch T-valve threads by turning it counterclockwise. Ensure the washer is pushed to the bottom. Screw the other end of the hose onto the sprayer threads, making sure the rubber washer is in place. Hand tighten the nut firmly. Use an adjustable wrench on the groove at the bottom of the hose nut to turn it tighter if needed.

  4. Mounting the Spray Wand Holder: Hang the pre-assembled toilet tank clip and spray wand holder over the edge of the tank under the lid. Alternatively, you can mount the holder on the wall by removing the stainless steel clip. Ensure the sprayer fits securely in the holder without accidentally turning on the water flow.

  5. Checking for Leaks: After installation, check for leaks. Turn off the spray wand and T-valve, then slowly turn on the water valve for the toilet. Check for any leaks from the T-valve, hose, or spray wand. If no leaks are detected, slowly turn on the spray wand to check its functionality. Always turn off the safety shut-off valve after each use of the sprayer.

Step 1: Locate and Grab the Bidet Sprayer

The first step is to locate the bidet sprayer next to the toilet. The sprayer is positioned on a hook or holder specifically designed for it. Grab the bidet sprayer securely, ensuring a firm grip for ease of use.

Step 2: Open the Shut-off Valve

Before you start using the bidet sprayer, it’s important to open the shut-off valve to allow water to flow through. This can be done by turning the valve counterclockwise. Don’t worry, the water won’t start shooting automatically, so you have control over when and how it is used.

Step 3: Choose the Method of Use

Using a bidet is a personal choice, and there are different methods you can employ. Depending on your flexibility and comfort, you can choose to enter either through the rear of the seat or the front. Some females may prefer to spray through the front of the seat to effectively clean both the anal and genital regions simultaneously. Find the method that works best for you.

Step 4: Start Spraying

Once you have positioned yourself comfortably, lightly push the lever on the bidet sprayer handle to start the spraying process. It’s important to aim the sprayer at an angle for the most effective cleaning and to avoid any splashback from inside the toilet bowl. Experiment with different angles to find what works best for you.

Note: It may take a few uses to learn the desired pressures and angles of the bidet sprayer before you feel comfortable. Don’t get discouraged after a couple of uses; give yourself time to get used to the bidet operation.

Step 5: To Wipe or Not to Wipe? 

When it comes to bidet users questioning the need for wiping, the choice ultimately relies on the effectiveness of your bidet’s cleaning capabilities. With the Aquaus 360 bidet, which is handheld, you can enjoy precise rinsing and greater flexibility of use compared to other bidet options. Its design allows for easy adjustment of the spray wand’s positioning, ensuring thorough and effective cleaning. If your bidet provides ample water pressure and precise rinsing, wiping may not be necessary.

The Aquaus 360 bidet was specifically crafted as a handheld solution, providing a truly refreshing and more efficient bathroom experience than other bidet options. It stands out with its dual adjustable thumb pressure controls, making precision rinsing incredibly simple. You can start by spraying a small stream of water to locate the target area, and then effortlessly increase the spray pressure from a soothing and gentle rinse to a powerful jet spray. This level of control allows for a personalized and thorough cleaning experience.

With its ergonomic design, versatility and precision spray the Aquaus 360 bidet proves to be the ultimate tool for the job offering enhanced comfort and efficiency.

However, using a bidet may seem unfamiliar to beginners, and one common question is how to dry after using a bidet. While bidets are designed to reduce the need for toilet paper, there are still options for drying yourself. How to Dry After Using a Bidet: A Guide for Beginners

Tips for Using a Bidet:

  • Experiment with different water pressures to find the level that is most comfortable for you.
  • Maintain a relaxed posture while using the bidet to ensure maximum comfort.
  • If you experience any discomfort or irritation, adjust the angle or pressure of the bidet sprayer accordingly.
  • Consider using the Aquaus 360 bidet for faucet with warm water for added comfort, especially during colder months.
  • Regularly clean and maintain your bidet sprayer to ensure optimal hygiene and performance.

Frequently Asked Questions (FAQs):

  1. Is using a bidet more hygienic than using toilet paper?

Using a bidet is widely considered to be more hygienic than using toilet paper alone. Bidets provide a thorough cleansing using water, which effectively removes bacteria and residue from the body. Unlike toilet paper, bidets do not smear or spread germs. They offer a refreshing and cleaner experience.

  1. Can I install a bidet in my existing bathroom?

Yes, bidets can be installed in existing bathrooms. There are various types of bidets available, including standalone fixtures, bidet attachments, and handheld bidet sprayers. The installation process may vary depending on the type of bidet you choose, but many options are designed for easy installation without requiring extensive plumbing modifications.

  1. Can bidets be used by both men and women?

Yes, bidets can be used by both men and women. Bidets are versatile and can effectively cleanse various body parts. Men can use bidets for thorough cleaning after using the toilet, while women can benefit from additional cleaning in the genital area. Bidets offer a personalized and hygienic experience for all users.

  1. Is using a bidet suitable for individuals with sensitive skin?

Using a bidet can be suitable for individuals with sensitive skin. The gentle flow of water from a bidet can provide a soothing and non-irritating cleaning experience. However, it is essential to adjust the water pressure to a comfortable level and avoid using hot water that could further irritate sensitive skin. If you have specific skin concerns, it is recommended to consult with a dermatologist before using a bidet.

  1. How do I clean and maintain a bidet?

Cleaning and maintaining a bidet is relatively simple. Regularly wipe down the bidet surface with a mild soap solution and a soft cloth. Avoid using abrasive cleaners or rough materials that could damage the bidet’s finish. It is also recommended to follow the manufacturer’s instructions for specific cleaning guidelines. Additionally, some bidets may have removable nozzles that can be cleaned separately. By practicing regular cleaning and maintenance, you can ensure the longevity and hygiene of your bidet.

Remember, if you have any further questions or concerns regarding bidet usage, installation, or maintenance, it’s always advisable to consult the manufacturer’s instructions or seek assistance from a professional plumber.


Using a bidet is a simple and effective way to enhance personal hygiene and achieve a clean, refreshing wash after using the toilet. The Patented Aquaus 360° bidet sprayer provides a revolutionary solution for all-natural personal hygiene. By following the step-by-step guide outlined in this article, you can confidently use a bidet and enjoy the benefits of improved cleanliness and comfort. Experiment with different techniques and settings to find what works best for you, and don’t hesitate to consult the provided FAQ section for additional information. Embrace the convenience and hygiene offered by bidet usage, and elevate your personal hygiene routine to a new level of cleanliness and freshness.